ADLINK Technology Q7-BT, Technical Reference

Page: 13 / 50

Product Overview 7
Q7-BT
Figure 1-4: Heat Spreader mounting dimensions (top side)
1.5 Getting Started
Mount the Q7-BT to the carrier as illustrated in Figure 1-5, which provides a profile view of the
module mounted to the carrier with dimensions.
Figure 1-5: Qseven module mounting dimensions (profile)
ADLINK strongly recommends plastic spacers
instead of metal spacers for mounting the board.
Metal spacers create the possibilities of short cir-
cuits with the components located around the
mounting holes, which can ruin the board
Be sure to observe the EMC security measures. Make
sure you are always at the same potential as the mod-
ule.
Ø
Ø
70
6x M3x5
4x 2.7
4x 5.5
54
65 61 54 48
2.5
30
34
1.4
8
11
1.2
Q7-BT_heat_spreader_dmn_a
Qseven Module PCB
Heatspreader
Qseven Connector
Carrier Borad PCB
Note: Dimension is dependent
on connector height used
All measurements are in millimeters
All dimensions wiothout tol/-0.2mm
See
Note
2.00
1.20
+/-0.1
6.00
NOTE:
CAUTION: