manualshive.com logo in svg

ADLINK Technology PXI -3950, User Manual, Page: 66 / 85

Share
Download
ADLINK Technology PXI -3950 User Manual Download Page 66

Driver I nstallation 

 51

PXI -3950

User’s Manual

4.3.2

Install the Marvell GbE Driver

Please follow the following steps to install GbE driver for Mar-
vell 88E8053 Gigabit Ethernet controller.

For Windows 2000 users:

1. After booting the Windows system, there are two uniden-

tified Ethernet controllers listed in the Device Manager.

2. Right-click on the Ethernet controller and select “Update 

Driver …”

3. Follow the on-screen instructions to specify the location 

of driver. The Ethernet driver is located in the directory: 

x:\ Driver Installation\PXI Platform\PXI 

controller\PXI-3950\Ethernet\ 
Marvell_88E8053\2000\, where x: denotes the 
CD-ROM drive.

For Windows XP users:

1. After booting the Windows system, there are two uniden-

tified Ethernet controllers listed in the Device Manager.

2. Right-click on the Ethernet controller and select “Update 

Driver …”

3. Follow the on-screen instructions to specify the location 

of driver. The Ethernet driver is located in the directory: 

x:\ Driver Installation\PXI Platform\PXI 

controller\PXI-3950\Ethernet\ 
Marvell_88E8053\XP\, where x: denotes the 
CD-ROM drive.

Summary of Contents for PXI -3950






















































































Reviews:

No comments