manualshive.com logo in svg

ADLINK Technology PCI-8124, User Manual, Page: 85 / 85

Share
Download
ADLINK Technology PCI-8124 User Manual Download Page 85

76

Warranty Policy

3. Our repair service is not covered by ADLINK's guarantee

in the following situations:

X

Damage caused by not following instructions in the 
User's Manual.

X

Damage caused by carelessness on the user's part dur-
ing product transportation. 

X

Damage caused by fire, earthquakes, floods, lightening, 
pollution, other acts of God, and/or incorrect usage of 
voltage transformers.

X

Damage caused by unsuitable storage environments 
(i.e. high temperatures, high humidity, or volatile chemi-
cals).

X

Damage caused by leakage of battery fluid during or 
after change of batteries by customer/user. 

X

Damage from improper repair by unauthorized ADLINK 
technicians. 

X

Products with altered and/or damaged serial numbers 
are not entitled to our service. 

X

This warranty is not transferable or extendible.

X

Other categories not protected under our warranty. 

4. Customers are responsible for shipping costs to transport

damaged products to our company or sales office.

5. To ensure the speed and quality of product repair, please

download an RMA application form from our company web-
site: http://rma.adlinktech.com/policy. Damaged products
with attached RMA forms receive priority.

If you have any  further questions, please email our FAE staff: 
[email protected].

Summary of Contents for PCI-8124






















































































Reviews:

No comments