26
Hardware Information
2.4
Jumpers
COM1 mode Jumper Settings (JP1-4)
Short the jumper pins according to the following settings to set
COM1 to RS-232/422/485/485+ mode
Clear CMOS (JP5)
The CMOS RAM data contains the date / time and BIOS setting
information. CMOS is powered by the onboard button cell battery.
To erase the CMOS RAM data: (1) Unplug the NuPRO-935A (2)
short the JP1 pin 2-3 (3) turn the power on. After power on,
remove the jumper cap from pin 2-3 and reinstall it to pin 1-2.
#
RS-232
RS-422
RS-485
RS-485+
JP1
1-3, 2-4
3-5, 4-6
3-5, 4-6
3-5, 4-6
JP2
1-3, 2-4
3-5, 4-6
3-5, 4-6
3-5, 4-6
JP3
1-2
3-4
5-6
5-6
JP4
-
1-3, 2-4
1-3, 2-4
3-5, 4-6
RTC status
Connection
JP5
Normal
1 – 2
Clear CMOS
2 – 3
This page intentionally left blank.
Summary of Contents for NuPRO-935A
