ADLINK Technology NuPRO-861 User Manual Download Page 56

Page: 56 / 67

•

Award BIOS Setup

PWRON After PWR-Fail:

This item allows the user to power on the system after power failure.

Options: Off, On, and Former-Sts.

Onboard Lan Boot ROM:

Select “Enabled” if the system has a LAN device installed on the system board.

Options: Enabled, Disabled.

Onboard Serial Port 3/Port4:

Select an address for the third and forth serial ports.

Serial Port 3/Port 4 Use IRQ:

Select an IRQ for the third and forth serial ports.

3.8

Power Management Setup

The Power Management Setup allows the user to configure the system to most
effectively save energy while operating in a manner consistent with the
individual’s computer operating style.

Phoenix - AwardBIOS CMOS Setup Utility

Power Management Setup

ACPI Function
Power Management
Video Off Method
Video Off In Suspend
Suspend Type
Suspend Mode
HDD Power Down
CPU THER-Throttling
Wake-Up by PCI card

** Reload Global Timer Events **

Primary IDE 0
Primary IDE 1
Secondary IDE 0
Secondary IDE 1
FDD, COM, LPT Port
PCI PIRQ [A-D]#

Enabled
User Define
DPMS
Yes
Stop Grant
Disabled
Disabled
50.0%
Disabled

Disabled
Disabled
Disabled
Disabled
Disabled
Disabled

Item Help

____________________________

Menu Level

↑↓→←

Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help

F5: Previous Values F6: Fail-safe defaults F7: Optimized Defaults

Summary of Contents for NuPRO-861




































































Search results

Summary of Contents for NuPRO-861

Reviews:

Brands by name

Popular brands

ADLINK Technology NuPRO-861, User Manual

Search results

Summary of Contents for NuPRO-861

Reviews:

Brands by name

Popular brands