manualshive.com logo in svg

ADLINK Technology NuPRO-861, User Manual

Share
Download
ADLINK Technology NuPRO-861 User Manual Download Page 44

38

 

•

 

Award BIOS Setup 

fills the remaining fields on this menu. 
 

IDE Primary Master:

 Options: None, Auto, and Manual 

Selecting “Manual” allows the user to set the remaining fields on this screen. 
"User Type" allows the user to select the number of cylinders, heads, etc. Note: 
PRECOMP=65535 means NONE. 
 

Access Mode:

 Options: CHS, LBA, Large, and Auto 

Choose the access mode for this hard disk 
 

Capacity:

 Options Auto Display your disk drive size 

Disk drive capacity (Approximate). Note that this size is usually slightly larger 
than the size of a formatted disk given by a disk-checking program. 
 
The following options are selectable only if the ‘IDE Primary Master’ item is set to 
‘Manual’ 
 

Cylinder:

 Options Min = 0, Max = 65535 

Set the number of cylinders for this hard disk. 
 

Head:

 Options Min = 0, Max = 255 

Set the number of read/write heads 
 

Precomp:

 Options Min = 0, Max = 65535 

**** 

Warning

: Setting a value of 65535 indicates no hard disk 

 

Landing zone:

 Options Min = 0, Max = 65535 

**** 

 
Sector:

 Options Min = 0, Max = 255 

Number of sectors per track 
 
 

3.5 

Advanced BIOS Features 

This section allows the user to configure their system for basic operation. The 
user can also select the system’s default speed, boot-up sequence, keyboard 
operation, shadowing, and security. 

 

Phoenix - AwardBIOS CMOS Setup Utility

 

Advanced BIOS Features

 

Summary of Contents for NuPRO-861




































































Reviews:

No comments

Brands by name

Popular brands

Load more brands