VIA PLE133T Chipset Hardware and VGA Driver
•
29
4.2 VGA
Driver
Installation
This section provides information on how to install the VGA driver that come
in the Compact Disk with the package. Please follow the instructions set forth
in this section carefully. Please note that there must be relevant software
installed in your system before you could proceed to install the VGA driver.
Installing the Drivers for Windows 98/95 and Win 2000
The following section describes the normal display driver installation
procedures for Windows 95/98/2000. Use the following procedures when
installing the display drivers for Windows 98/95.
1. The driver is included in the ADLINK CD. Run the
SETUP.exe
under the following directory:
X:\CHIPDRV\VGA\VT8601T\win 9x
(or
Win 2K
folder for Win 2000 installation).
2. Click
Next
on
Welcome Screen
to read and agree to the license
agreement.
3. Click
Yes
if you agree to continue. NOTE: If you click
No
, the
program will terminate.
4. Click
Yes
to restart your computer and for the new settings to take
effect.
5.
Follow the screen instructions and use default settings to complete
the setup when Windows 95/98/2000 is re-started.
Installing the Drivers for Windows NT 4.0
[
IMPORTANT
]
:
You should install the Windows NT 4.0 with at least Service
Pack 4 (version number: 4.00.1381) first before installing the VGA driver. If
you don't have the Windows NT 4.0 Service Pack 4, please contact your
software vendor or download it from Microsoft's web site.
The procedures below show you how to install the VGA driver for Windows
NT 4.0.
1.
Boot Windows NT 4.0.
2. The driver is included in the ADLINK CD. Run the
SETUP.exe
under the following directory:
X:\CHIPDRV\VGA\VT8601T\win nt4
3. Click
Next
on
Welcome Screen
to read and agree to the license
agreement.
4. Click
Yes
if you agree to continue. NOTE: If you click
No
, the
program will terminate.
