ADLINK Technology NuDAQ PCI-9810 User Manual Download Page 80

Page: 80 / 80

Warranty Policy

3. Our repair service is not covered by ADLINK's two-year

guarantee in the following situations:

Damage caused by not following instructions in the
user's manual.

Damage caused by carelessness on the user's part
during product transportation.

Damage caused by fire, earthquakes, floods, lightening,
pollution, other acts of God, and/or incorrect usage of
voltage transformers.

Damage caused by unsuitable storage environments
(i.e. high temperatures, high humidity, or volatile
chemicals).

Damage caused by leakage of battery fluid during or
after change of batteries by customer/user.

Damage from improper repair by unauthorized
technicians.

Products with altered and/or damaged serial numbers
are not entitled to our service.

Other categories not protected under our warranty.

4. Customers are responsible for shipping costs to transport

damaged products to our company or sales office.

5. To ensure the speed and quality of product repair, please

download an RMA application form from our company
website: http://rma.adlinktech.com/policy. Damaged
products with attached RMA forms receive priority.

If you have any further questions, please email our FAE staff:
[email protected].

Summary of Contents for NuDAQ PCI-9810

















































































Search results

Summary of Contents for NuDAQ PCI-9810

Reviews:

Related manuals for NuDAQ PCI-9810

Brands by name

Popular brands

ADLINK Technology NuDAQ PCI-9810, User Manual

Search results

Summary of Contents for NuDAQ PCI-9810

Reviews:

Related manuals for NuDAQ PCI-9810

Brands by name

Popular brands