58
Operation Theory
The Encoder OGRx input is different from the encoder phase
input since you need to add an ex24V power to drive
the photo-couple. Figure 4-31 shows the OGRx input.
Figure 4-31: Encoder OGRx Input
CW/CCW Encoder Mode
When GPTC is set to CW/CCW encoder mode and when the
input EAx is connected to CW source signal and EBx is
connected to CCW source signal, pulses from EAx will cause
the counter to counter up and spin the motor clockwise.
Otherwise, pulses from EBx will cause the counter to counter
down and spin the motor counterclockwise. Figure 4-32 shows
the increase/decrease of counter value in CW or CCW encoder
mode.
Figure 4-32: CW/CCW Encoder Timing
Summary of Contents for NuDAQ PCI-9222
Page 12: ......
Page 36: ...24 Hardware Information...
