ADLINK Technology NuDAM ND-6510, User Manual, Page: 35 / 47

Install a Brand-New NuDAM 4-3
Initialization Wiring
Figure 4-1 Layout for Configuring the NuDAM module
4.2 Install a New NuDAM to a Existing Network
Equipments for Install a New Module
•
A existing NuDAM network
•
New NuDAM modules.
•
DC Power supply (+10 to +30 V
DC
).
Installing Procedure
1. Configure the new NuDAM module according the initialization
procedure in section 4.1.
2. The baud rate and check-sum status must be identity with the
existing RS-485 network. The address ID must not be conflict with
other NuDAM modules.
3. Power off the NuDAM local power supply of the existing RS-485
network.
4. Power off the host computer.
5. Add the new module to the existing RS-485 network.
6. Power on the host computer.
7. Power on the NuDAM local power supply.
8. Use the NuDAM administration utility to check entire network.
Host
Computer
DATA +
DATA -
+Vs GND
DATA+
DATA -
Default*
+Vs GND
Local Power Supply
+10 V to +30 V
+Vs GND
New
NuDAM
module
NuDAM-6520
RS-232/RS-485
Converter
RS-232