Chapter 4
BIOS Setup
36
Reference Manual
nanoX-TCR
•
Super IO Configuration
♦
Serial Port 0 Configuration
•
Serial Port [Disabled;
Enabled
]
•
Device Settings IO=3F8h; IRQ=4
•
Change Settings [
Auto
;
IO=3F8h; IRQ=4;
IO=3F8h; IRQ=3, 4, 5, 6, 7, 10, 11, 12;
IO=2F8h; IRQ=3, 4, 5, 6, 7, 10, 11, 12;
IO=3E8h; IRQ=3, 4, 5, 6, 7, 10, 11, 12;
IO=2E8h; IRQ=3, 4, 5, 6, 7, 10, 11, 12;]
♦
Serial Port 1 Configuration
•
Serial Port [Disabled;
Enabled
]
•
Device Settings IO=2F8h; IRQ=3
•
Change Settings [
Auto
;
IO=2F8h; IRQ=3;
IO=3F8h; IRQ=3, 4, 5, 6, 7, 10, 11, 12;
IO=2F8h; IRQ=3, 4, 5, 6, 7, 10, 11, 12;
IO=3E8h; IRQ=3, 4, 5, 6, 7, 10, 11, 12;
IO=2E8h; IRQ=3, 4, 5, 6, 7, 10, 11, 12;]
•
Serial Port Console Redirection
♦
COM0
•
Console Redirection [
Disabled
; Enabled]
•
Console Redirection Settings
- Terminal Type [VT100; VT100+; VT-UTF8;
ANSI
]
- Bits per second [9600; 19200; 38400; 57600;
115200
]
- Data Bits [7;
8
]
- Parity [
None
; Even; Odd; Mark; Space]
- Stop Bits [
1
; 2]
- Flow Control [
None
; Hardware RTS/CTS]
- Recorder Mode [
Disabled
; Enabled]
- Resolution 100x31 [
Disabled
; Enabled]
- Legacy OS Redirection Resolution [
80x24
; 80x25]
♦
COM1
•
Console Redirection [
Disabled
; Enabled]
•
Console Redirection Settings [Same as COM0]
.
NOTE
The serial port console is not hardware protected. Diagnostic software that
probes hardware addresses may cause a loss or failure of the serial console
functions.
