ADLINK Technology MXE-1300 Series, User Manual, Page: 25 / 80

Introduction 13
MXE-1300
1.7 Rear Panel I/O Connectors
Figure 1-9: Rear Panel I/O
Table 1-5: MXE-1300 Rear Panel I/O Connector Legend
1.7.1 DC Power Supply Connector
The DC power supply connector consists of three pins, V+, chas-
sis ground, and V- from right to left respectively. V+ and V- pins
are for DC power input and chassis ground pin grounds the chas-
sis for better EMC compatibility. DC power input of the MXE-1300
allows a voltage input range from DC 6 to 36V, with UVP (under
voltage protect of 6V), OVP (over voltage protect of 36V), and
reversed polarity protection.
A DC power supply connector
B COM port connectors (DB9 x4)
C USB 2.0 connectors (Type A)
D Gigabit Ethernet connector
E Digital I/O connector
F Antenna connector (optional)
A
B C
F
E