ADLINK Technology MXC-6401D User Manual Download Page 109

Page: 109 / 124

PRELIMINARY

Digital Input/Output Function Library

MXC-6400

Appendix E Digital Input/Output

Function Library

ADMX_DIO_Init

Reserves system resources for digital input/output API service.

Must be called before using other MXC-6400 matrix_dio func-
tions.

Syntax

C/C++, Linux C/C++, and Borland C++

I16 ADMX_DIO_Init(void)

Visual Basic

ADMX_DIO_Init () As Integer

Parameter(s)

None

Return codes

NoError

ErrorOpenDriverFailed

ErrorDeviceIoctl

ADMX_DIO_Close

Instructs the MXC-6400 matrix_dio library that DI/O is currently
idle and may be released. Required at the end of a program to
release all system resources.

Syntax

C/C++, Linux C/C++, and Borland C++

I16 ADMX_DIO_Close(void)

Visual Basic

ADMX_DIO_Close () As Integer

Parameter(s)

None

Summary of Contents for MXC-6401D





























































































































Search results

Summary of Contents for MXC-6401D

Reviews:

Related manuals for MXC-6401D

Brands by name

Popular brands

ADLINK Technology MXC-6401D, User Manual

Search results

Summary of Contents for MXC-6401D

Reviews:

Related manuals for MXC-6401D

Brands by name

Popular brands