ADLINK Technology miniBASE-10R, User Manual

Page: 35 / 44

miniBASE-10R
Connectors, Pinouts and Jumpers
29
6.17. Power Jumper Settings
6.17.1. JPX2: AT/ATX Mode
In AT mode, JPX2 shorts PS_ON# to ground directly
to force power on.
6.17.2. JPX3: 5VSB to Module Source
6.17.3. JP1: PS_ON# Signal Source
All ADLINK modules support S3 mode and
subsequent power down of the ATX power supply.
For modules that connect the S3 signal, PS_ON#
should always be set to SUS_S3# as source
(even when S3 mode is disabled in the BIOS).
For modules that do not bring out the S3 signal,
PS_ON# should be set to SUS_S5# as source.
Note: <<<< indicates default setting
Pin Signal
1-2 ATX <<<<
2-3 AT
Pin Signal
1-2 w/ 5VSB
<<<<
2-3 w/o 5VSB
Pin Signal
1-2 SUS_S3#
<<<<
2-3 SUS_S5#