manualshive.com logo in svg

ADLINK Technology Matrix MXE-5000 Series, User Manual

Share
Download
ADLINK Technology Matrix MXE-5000 Series User Manual Download Page 45

BIOS Settings

 35

Matrix MXE-5000 Series

User’s Manual

4.5.2

Boot Device Priority 

Specifies the priority of boot devices. All installed boot devices are

detected during POST and displayed on the screen, with selsec-

tion as follows.

Boot from a SATA hard drive

1. Select 

Hard Disk Drives

 and press Enter.

2. SATA hard drive is displayed with its identification string.

Specify it as 

1st Drive

.

3. Go back to upper level and select SATA hard drive as

1st Boot Device

.

Boot from CF card

1. Select 

Hard Disk Drives

 and press Enter. 

2. CF card is displayed with its identification string. Specify

it as 

1st Drive

.

3. Go back to upper level and select CF card as 

1st Boot

Device

.

Boot from USB CD/DVD drive

1. Select 

USB Drives

 and press Enter. 

2. CD/DVD drive is displayed with its identification string.

Specify it as 

1st Drive

.

3. Go back to upper level and select CD/DVD drive as 

1st

Boot Device

.

Boot from USB Flash disk

1. Select 

USB Drives

 and press Enter. 

2. USB flash disk is displayed with its identification string.

Specify it as 

1st Drive

.

3. Go back to upper level and select USB flash disk as 

1st

Boot Device

.

Summary of Contents for Matrix MXE-5000 Series

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands