manualshive.com logo in svg

ADLINK Technology M-855 Series, User Manual

Share
Download
ADLINK Technology M-855 Series User Manual Download Page 52

46 

•

 BIOS Setup 

OnChip Primary/Secondary PCI IDE: 

The integrated peripheral controller contains an IDE interface with support for two 
IDE channels.  Select “Enabled” to activate each channel separately. 
 

The choices: Enabled, Disabled. 

 
 

IDE Primary/Secondary Master/Slave PIO: 

The four IDE PIO (Programmed Input/Output) fields let you set a PIO mode (0-4) for 
each of the four IDE devices that the onboard IDE interface supports. Modes 0 
through 4 provide successively increased performance. In Auto mode, the system 
automatically determines the best mode for each device. 
 

The choices: Auto, Mode 0, Mode 1, Mode 2, Mode 3 and Mode 4. 

 

IDE Primary/Secondary Master/Slave UDMA: 

Ultra DMA/33 implementation is possible only if your IDE hard drive supports it and 
the operating environment includes a DMA driver (Windows 95 OSR2 or a third-party 
IDE bus master driver). If your hard drive and your system software both support 
Ultra DMA/33, select “Auto” to enable BIOS support.  
 

The choices: Auto, Disabled. 

 

IDE HDD Block Mode: 

Block mode is also called block transfer, multiple commands, or multiple sector 
read/write. If your IDE hard drive supports block mode (most new drives do), select 
Enabled for automatic detection of the optimal number of block read/writes per sector 
the drive can support. 
 

The choices: Enabled, Disabled 

 

Onboard Device: 

Onboard Device

 

 

USB Controller 
USB 2.0 Controller 
USB Keyboard Support 
USB Mouse Support 
AC97 Audio 
Init Display First 

 
Enabled 
Enabled 
Disabled 
Disabled 
Auto 

Onboard/AGP 

      

Item Help 

____________________________ 
 
Menu Level      

¾

 

 
 

  

↑↓→←

Move   Enter: Select   +/-/PU/PD: Value   F10: Save   ESC: Exit   F1: General Help  

  F5: Previous Values    F6: Fail-safe defaults        F7: Optimized Defaults 

 

USB / USB 2.0 Controller: 

Select “Enabled” if your system contains a Universal Serial Bus (USB) / USB 2.0 
controller and you have USB peripherals.  
 

The choices: Enabled, Disabled. 

Summary of Contents for M-855 Series
































































Reviews:

No comments

Brands by name

Popular brands

Load more brands