manualshive.com logo in svg

ADLINK Technology M-855 Series, User Manual

Share
Download
ADLINK Technology M-855 Series User Manual Download Page 39

 

BIOS Setup 

•

 33

 

 

3 

Award BIOS Setup 

3.1 

 BIOS Instructions 

Award’s ROM BIOS provides a built-in Setup program, which allows the user to 
modify the basic system configuration and hardware parameters. The modified data 
will be stored in a battery-backed CMOS, so that data will be retained even when the 
power is turned off. In general, the information saved in the CMOS RAM will stay 
unchanged unless there is a configuration change in the system, such as hard drive 
replacement or a device is added. 
 
It is possible for the CMOS battery to fail, which would cause data loss in the CMOS 
only. If that happens the BIOS settings would need to be reconfigured. 

 
 

3.2 Main Menu 

 

Once you enter the AwardBIOS™ CMOS Setup Utility, the Main Menu will appear on 
the screen. The Main Menu allows you to select from several setup functions and two 
exit choices. Use the arrow keys to select among the items and press <Enter> to 
accept and enter the sub-menu. 
 

Summary of Contents for M-855 Series
































































Reviews:

No comments

Brands by name

Popular brands

Load more brands