ADLINK Technology IMT-BT, User Manual

Page: 49 / 58

►
Do not use an AC adapter other than one approved for
your device. Use of another type of AC adapter may
result in malfunction and/or danger.
Do not use the AC adapter in a high moisture environ-
ment. Never touch the AC adapter when your hands or
feet are wet.
Allow adequate ventilation around the AC adapter
when using it to operate the device or charge the
battery. Do not cover the AC adapter with paper or
other objects that will reduce cooling. Do not use the
AC adapter while it is inside a carrying case.
Connect the AC adapter to a proper power source. The
voltage and grounding requirements are found on the
product case and/or packaging.
Do not use the AC adapter if the cord becomes dam-
aged.
Do not attempt to service the adapter. There are no user
serviceable parts inside. Replace the unit if it is damaged
or exposed to excess moisture.
When charging the equipment should be installed near
an easily accessible outlet.
To fully disengage the power to the unit, please
disconnect the power cord from the AC inlet.
►
Accessory equipment connected to the analog and digital
interfaces must be in compliance with the respective
nationally harmonized IEC standards (i.e. IEC 60601-1
for medical equipment.) Furthermore all configurations
shall comply with the system standard in IEC 60601-1.
Anyone who connects additional equipment to the signal
input part or signal output part is configuring a medical
system, and is therefore, responsible that the system
complies with the requirements of the system standard
IEC 60601-1. The unit is for exclusive interconnection
with IEC 60601-1 certified equipment in the patient
environment and IEC 60XXX certified equipment
out-side of the patient environment.
40 Important Safety Instructions