ADLINK Technology HPERC-IBR-MC, User Manual

Page: 41 / 53

BIOS Setup 31
HPERC-IBR-M
3.3.9 USB
3.3.10 F81216 Second Super IO
F81216 Second Super IO > Serial Port 0-3 Configuration
Feature Options Description
USB Module version Info only
USB Devices: Info only
Legacy USB Support
Enabled
Disabled
Enables Legacy USB support.
XHCI Hand-off
Enabled
Disabled
This is a workaround for OSes without XHCI
hand-off support.
EHCI Hand-off Enabled
Disabled
This is a workaround for OSes without EHCI
hand-off support.
USB Mass Storage Driver Support
Enabled
Disabled
Enable/Disable USB Mass Storage Driver
Support.
USB Configuration PCH USB Configuration
USB transfer time-out 1 sec
5 sec
10 sec
20 sec
The time-out value for Control, Bulk, and Interrupt
transfers.
Device reset time-out 10 sec
20 sec
30 sec
40 sec
USB mass storage device start unit command
time-out.
Device power-up delay
Auto
Manual
Maximum time the device will take before it
properly reports itself to the host controller.
Feature Options Description
I81216 Super IO Configuration Info only
Serial Port 0 Configuration Submenu Set Parameters of Serial Port 0.
Serial Port 1 Configuration Submenu Set Parameters of Serial Port 1.
Serial Port 2 Configuration Submenu Set Parameters of Serial Port 2.
Serial Port 3 Configuration Submenu Set Parameters of Serial Port 3.
Feature Options Description
Serial Port 0 Configuration Info only
Serial Port Disabled
Enabled
Enable or Disable Serial Port (COM)
Device Setting Info only
Change Setting
Auto
IO=260;IRQ=11;
IO=260;IRQ=10,11,12
IO=268;IRQ=10,11,12
IO=270;IRQ=10,11,12
IO=278;IRQ=10,11,12
Select an optimal settings for Super IO
Device.
RS232/RS422
RS232
RS422
RS232/RS422 selection