ADLINK Technology EOS-JNX-G, User Manual, Page: 17 / 53

Introduction 7
EOS-JNX Series
I Recovery Button
Press recovery button and reset button at the same
time to trigger recovery mode.
See 3.3 System Recovery on page 38.
J RS-232/485 Port Supports RS-232/485 connectivity and control.
K
System Status
LEDs
Shows system operation status
Green
• On: OS ready
• Blinking: The system is booting or cannot boot
successfully
Red
• On: Watchdog triggered and then OS boots
successfully
• Blinking: Watchdog has consecutively triggered
more than two times and then OS boots
successfully
Orange
• DC-in ready
L Reset Button Press to reboot the system.
M Power Button Press to boot up, or shut down the system.
Item Name Description
Table 1-2: Front Panel I/O Connectors & Controls