70
Important Safety Instructions
Never attempt to repair the device, which should only be
serviced by qualified technical personnel using suitable
tools
A Lithium-type battery may be provided for uninterrupted
backup or emergency power.
The device must be serviced by authorized technicians
when:
The power cord or plug is damaged
Liquid has entered the device interior
The device has been exposed to high humidity and/or
moisture
The device is not functioning or does not function
according to the User’s Manual
The device has been dropped and/or damaged and/or
shows obvious signs of breakage
Disconnect the power supply cord before loosening the
thumbscrews and always fasten the thumbscrews with a
screwdriver before starting the system up
It is recommended that the device be installed only in a
server room or computer room where access is:
Restricted to qualified service personnel or users familiar
with restrictions applied to the location, reasons therefor,
and any precautions required
Only afforded by the use of a tool or lock and key, or
other means of security, and controlled by the authority
responsible for the location
If PoE (Power over Ethernet) is enabled for the device, the
system can ONLY be deployed indoors. Unless otherwise
noted, the PoE system is NOT designed to withstand the
rigors of outdoor use.
CAUTION:
Risk of explosion if battery is replaced with one of an incorrect
type; please dispose of used batteries appropriately.
Risque d’explosion si la pile est remplacée par une autre de
type incorrect. Veuillez jeter les piles usagées de façon appro-
priée.
Summary of Contents for EOS-1300
