manualshive.com logo in svg

ADLINK Technology DLAP-4000 Series, User Manual, Page: 58 / 91

Share
Download
ADLINK Technology DLAP-4000 Series User Manual Download Page 58

48

BIOS Setup

Leading

EDGE COMPUTING

Intel Trusted 
Execution 
Technology

Disabled

Enabled

Enable utilization of additional 
hardware capabilities provided 
by Intel Trusted Execution 
Technology.

Intel 
SpeedStep

Disabled

Enabled

Allows more than two frequency 
ranges to be supported.

Turbo Mode

Disabled

Enabled

Enable/Disable processor Turbo 
Mode (requires Intel Speed Step 
or Intel Speed Shift to be 
available and enabled)

C states

Disabled

Enabled

Enable/Disable CPU Power 
Management. Allows CPU to go 
to C States when it’s not 100% 
utilized.

Enhanced
C-state

Disabled

Enabled

Enable/Disable C1E. When 
enabled, CPU will switch to 
minimum speed when all cores 
enter C-State.

Package C 
state limit

C0/C1
C2
C3
C6
C7
C7S
C8
C9
C10
Cpu Default

Auto

Maximum Package C State Limit 
Setting. CPU Default: Leaves to 
Factory default value. Auto: 
Initializes to deepest available 
Package C State Limit.

Feature

Options

Description

Summary of Contents for DLAP-4000 Series




























































































Reviews:

No comments