ADLINK Technology DLAP-4000 Series, User Manual, Page: 51 / 91

BIOS Setup 41
DLAP-4000
Appendix A BIOS Setup
BIOS can be configured via a setup utility that is invoked during
BIOS boot phase. The BIOS configuration is kept in NVRAM
which is the same hardware part as BIOS is stored. All settings will
be remained after system is un-powered. In this section, BIOS
setup menu will be described.
A.1 BIOS Setup Menu
The BIOS setup utility is invoked by pressing <ESC> or <DEL>
keys. User can change BIOS settings during setup utility runs. A
reset of system is required in order to make new settings take
effect.
In BIOS setup utility, there are several hot keys are designed for
specific purpose. Hot keys are listed as below.
X
<F1>: General help in setup menu
X
<F8>: Load previous BIOS values
X
<F9>: Load BIOS default in setup utility
X
<F10>: Save & Exit setup utility
Menu Selection Bar
The Menu Selection Bar is located at the top of the screen. It
displays the top level available menus to the user:
X
Main Menu
X
Advanced Menu
X
Chipset Menu
X
Security Menu
X
Boot Menu
X
Save & Exit Menu