6
••
Installation
2.2 Unpacking
Your PCI-7432/33/34 card contains sensitive electronic
components that can be easily damaged by static electricity.
The card should be done on a grounded anti-static mat. The
operator should be wearing an anti-static wristband, grounded at
the same point as the anti-static mat.
Inspect the card module carton for obvious damage. Shipping
and handling may cause damage to your module. Be sure there
are no shipping and handing damages on the module before
processing.
After opening the card module carton, extract the system module
and place it only on a grounded anti-static surface component
side up.
Again inspect the module for damage. Press down on all the
socketed IC's to make sure that they are properly seated. Do this
only with the module place on a firm flat surface.
Note :DO NOT APPLY POWER TO THE CARD IF IT HAS BEEN
DAMAGED.
Now you are ready to install your PCI-7432/33/34 card.