ADLINK Technology cPCI-6630 Series, User Manual

Page: 129 / 139

Checkpoints & Beep Codes 117
cPCI-6630
0x18
Pre-Memory North Bridge initialization (North
Bridge module specific)
0x19 Pre-memory South Bridge initialization is started
0x1A
Pre-memory South Bridge initialization (South
Bridge module specific)
0x1B
Pre-memory South Bridge initialization (South
Bridge module specific)
0x1C
Pre-memory South Bridge initialization (South
Bridge module specific)
0x1D – 0x2A OEM pre-memory initialization codes
0x2B
Memory initialization. Serial Presence Detect
(SPD) data reading
0x2C
Memory initialization. Memory presence
detection
0x2D
Memory initialization. Programming memory
timing information
0x2E Memory initialization. Configuring memory
0x2F Memory initialization (other).
0x30
Reserved for ASL (see ASL Status Codes
section below)
0x31 Memory Installed
0x32 CPU post-memory initialization is started
0x33
CPU post-memory initialization. Cache
initialization
0x34
CPU post-memory initialization. Application
Processor(s) (AP) initialization
0x35
CPU post-memory initialization. Boot Strap
Processor (BSP) selection
0x36
CPU post-memory initialization. System
Management Mode (SMM) initialization
0x37
Post-Memory North Bridge initialization is
started
0x38
Post-Memory North Bridge initialization (North
Bridge module specific)
0x39
Post-Memory North Bridge initialization (North
Bridge module specific)
Status Code Description