ADLINK Technology cPCI-6510 Series, User Manual, Page: 22 / 112

Specifications 7
cPCI-6510
2 Specifications
2.1 cPCI-6510 Specifications
CompactPCI
Standard
PICMG® 2.0 CompactPCI® Rev. 3.0
PICMG® 2.1 Hot Swap Specification Rev.2.0
PICMG® 2.9 System Management Bus Rev. 1.0
PICMG® 2.16 Packet Switching Backplane Rev.1.0
Mechanical
Standard 6U CompactPCI®
Board size: 233.23 mm x 160mm
Single slot (4HP, 20.32mm) width
CompactPCI® connectors J1, J2, J3, J4 and J5
Processor
µFC-BGA Intel® Core™i7-610E, 4MB L2 cache, 2.53GHz
µFC-BGA Intel® Core™i7-620LE, 4MB L2 cache, 2.0GHz
µFC-BGA Intel® Core™i7-620UE, 4MB L2 cache, 1.06GHz
Chipset
Intel® QM57 Platform Controller Hub (PCH)
Memory
Dual channel DDR3-800/1066 soldered onboard SDRAM
with un-buffered ECC
DDR3-800 for Core™i7-620UE processor
DDR3-1067 for Core™i7-610E/620LE processors
Maximum 8GB capacity
CompactPCI Bus
PCI 64-bit/ 66MHz; V(I/O) 3.3V and 5V signaling
Supports operation in system slot or in peripheral slot with
connectivity to CompactPCI bus (Universal Mode)
1
Optional Satellite mode by switch setting
PMC/XMC
Two PCI 64-bit/133MHz PMC sites, V(I/O) 3.3V (contact
ADLINK for 5V support)
One PCIe x8 XMC site (shared with inner PMC site)
Graphics
Integrated in Intel® Core™i7 processor
One DVI-I port on front panel of cPCI-6510V provides digital
and analog signals.
Analog RGB signal to front or rear by switch selection
Second DVI port routed to rear
Supports dual independent display
Analog RGB up to QXGA
Ethernet
Four PCIe x1 Intel® 82574L GbE controllers
Two 10/100/1000BASE-T egress ports
Two 10/100/1000BASE-T ports on rear panel, optional
PICMG 2.16 support by switch selection