ADLINK Technology cPCI-6210 Series, User Manual

Page: 77 / 140

Driver Installation 63
cPCI-6210
6 Driver Installation
The cPCI-6210 drivers can be found on the ADLINK All-In-One
DVD at
X:\cPCI\cPCI-6210\ or from the ADLINK website
( http://www.adlinktech.com ). ADLINK provides validated driv-
ers for Windows XP Professional and Windows 7. We recommend
using these drivers to ensure compatibility. The VxWorks BSP can
be downloaded from the cPCI- 6210 product page on the ADLINK
website.
6.1 Driver Installation Procedure
The following describes the driver installation procedures for Win-
dows XP.
1. Install the Windows operating system before installing any
driver. Most standard I/O device drivers are installed during
Windows installation.
2. Install the chipset driver by extracting and running the pro-
gram in ...\Chipset\Intel_Chipset_Device_Software
_AllOS_9.2.0.1015.zip .
3. Install the Microsoft .NET Framework utilities (required for the
graphics utility) by extracting and running the program in
...\Chipset\Microsoft_Net_Framework_v3.5_SP1.zip.
4. Install the graphics driver and utilities by extracting and run-
ning the program in ...\Graphics\Intel_HD_Graphics
_Family_WinXP_6.14.10.5313.zip .
5. Install the LAN drivers by extracting and running the program
in …\LAN\Intel_82574L_Gigabit_Network_WINXP
_11.4.7.0.zip .
6. Install the Intel Rapid Storage Technology Utility by extract-
ing and running the program in …\AHCI\
Intel_Rapid_Storage_Technology_10.1.0.1008.zip .
NOTE:
NOTE:
In order to enable AHCI mode, you must pre-install the
Intel® Rapid Storage Technology driver using the F6 instal-
lation method described in the file
F6Readme.txt , located
here: …\AHCI\Intel RST Driver Files_F6 Install_
32bit_10.1.0.1008.zip (not required for Windows 7).