ADLINK Technology CM1-86DX3, Technical Reference

Page: 35 / 59

Interfaces 29
CM1-86DX3
Note : The shaded table cells denote power or ground.
10 FP3 Flat Panel Data 3 – data output, Blue1 (18-bit)
11 FP4 Flat Panel Data 4 – data output, Blue2 (18-bit)
12 FP5 Flat Panel Data 5 – data output, Blue3 (18-bit)
13 FP6 Flat Panel Data 6 – data output, Blue4 (18-bit)
14 FP7 Flat Panel Data 7 – data output, Blue5 (18-bit)
15 NC Not connected (FP8 = Flat Panel Data 8)
16 NC Not connected (FP9 = Flat Panel Data 9)
17 FP10 Flat Panel Data 10 – data output, Green0 (18-bit)
18 FP11 Flat Panel Data 11 – data output, Green1 (18-bit)
19 FP12 Flat Panel Data 12 – data output, Green2 (18-bit)
20 FP13 Flat Panel Data 13 – data output, Green3 (18-bit)
21 FP14 Flat Panel Data 14 – data output, Green4 (18-bit)
22 FP15 Flat Panel Data 15 – data output, Green5 (18-bit)
23 NC Not connected (FP16 = Flat Panel Data 16)
24 NC Not connected (FP17 = Flat Panel Data 17)
25 FP18 Flat Panel Data 18 – data output, Red0 (18-bit)
26 FP19 Flat Panel Data 19 – data output, Red1 (18-bit)
27 FP20 Flat Panel Data 20 – data output, Red2 (18-bit)
28 FP21 Flat Panel Data 21 – data output, Red3 (18-bit)
29 FP22 Flat Panel Data 22 – data output, Red4 (18-bit)
30 FP23 Flat Panel Data 23 – data output, Red5 (18-bit)
31 VDD_EN_CN TFT Power Enable
32 BKLT_EN_R TFT Backlight Enable
33 +VCC_TFT_CN Panel Voltage (+3.3 or +5 volts ±5%) depending on setting of JP3
34 +VCC_BKL_CN Backlight Voltage (+5 or +12 volts ±5%) depending on setting of JP2
35 GND3 Ground 3
36 GND4 Ground 4
37 CON_HSYNC Horizontal Sync – This signal is used for the digital horizontal sync output to
the CRT. Also used (with VSYNC) to signal power management state
information to the CRT per the VESA
™
DPMS
™
standard.
38 CON_VSYNC Vertical Sync – This signal is used for the digital vertical sync output to the
CRT. Also used (with HSYNC) to signal power management state information
to the CRT per the VESA
™
DPMS
™
standard.
39 AGNDR Analog Ground for Red
40 VGA_RED Red – This pin provides the Red analog output to the CRT.
41 AGNDG Analog Ground for Green
42 VGA_GREEN Green – This pin provides the Green analog output to the CRT.
43 AGNDB Analog Ground for Blue
44 VGA_BLUE Blue – This pin provides the Blue analog output to the CRT.
Table 3-9: Video Interface Pin Signals (CN7) (Continued)
Pin # Signal Description