ADLINK Technology cExpress-KL User Manual Download Page 80

Page: 80 / 98

BIOS Setup

7.6. Save

Exit

7.6.1. Save

Options

Feature

Options

Description

Save Changes and Exit

Exit system setup after saving the changes.

Discard Changes and Exit

Exit system setup without saving any changes.

Save Changes and Reset

Reset the system after saving the changes.

Discard Changes and Reset

Reset system setup without saving any changes.

Save Changes

Save changes done so far to any of the setup options.

Discard Changes

Discard changes done so far to any of the setup options.

7.6.2. Default

Option

Feature

Options

Description

Restore Defaults

Restore/Load default values for all the setup options.

Save as User Defaults

Save the changes done so far as User Defaults.

Restore User Defaults

Restore the User Defaults to all the setup options.

Summary of Contents for cExpress-KL



































































































Search results

Summary of Contents for cExpress-KL

Reviews:

Related manuals for cExpress-KL

Brands by name

Popular brands

ADLINK Technology cExpress-KL, User Manual

Search results

Summary of Contents for cExpress-KL

Reviews:

Related manuals for cExpress-KL

Brands by name

Popular brands