44
To update other images (BIOS, FRU, etc), just replace the target image and the file name
while typing command.
Item File
name
IPMC firmware
hpm1fw.img
BIOS hpm1bios.img
Note:
1. The hpm1bios.img always updates the backup BIOS image.
2. Make sure the payload power is off (M1 state) before updating the IPMC firmware
5.3.2
Update over KCS
Step1:
Prepare an aTCA-9300 with Linux system. Enter the following command to make
sure the ipmi_si and ipmi_devintf modules are loaded before the IPMItool utility can be
used.
Step2:
Put IPMItool and “target image” in the Linux system then enter the following
command:
