ADLINK Technology aTCA-8202, User Manual

Page: 31 / 36

Shelf Maintenance 19
aTCA-8202
4 Shelf Maintenance
This chapter provides information on how to remove and replace
user serviceable components on the aTCA-8202.
4.1 Fan Tray Module
This section provides information on how to remove and replace
the fan tray module which is located on the right side of the shelf
front panel. The fan tray is hot-swappable and may be replaced
while the shelf is operating.
Removing the fan tray module
1. Loosen the two retention screws on the right side of the
aTCA-8202 shelf.
2. Use your thumbs to pull the fan tray module outwards
from the shelf and detach the connectors from the back-
plane.
3. Fully remove the fan tray module from the shelf.
NOTE: NOTE:
To obtain replacement fan modules, contact ADLINK or your
local distributor.
WARNING:
To avoid injury, wait at least five seconds or until all fans have
stopped rotating before removing fan tray.