12
Getting Started
3.2
Inserting and Removing ATCA Blades
This section describes the insertion and removal procedures for
ATCA product and filler blades. ATCA blades are hot-swappable
and it is not necessary to power down the shelf to insert or remove
them. The same insertion/removal procedures apply to filler
blades, with the exception that filler blades do not have levers.
The aTCA-8202 is designed with two slots that support ATCA
blades. ATCA connectors are rigid and require careful handling
and proper installation. ATCA blades are equipped with locking
handles and retention screws for easy installation and removal.
Inserting an ATCA blade into the shelf
1. If necessary, remove any filler blades from the
aTCA-8202 shelf to expose the desired ATCA slot.
2. Align the blade with the card guides of the desired slot of
the shelf.
3. Position the ATCA blade into the slot, then carefully slide
its edges into the blade guide rail. Make sure that the
blade is correctly aligned with the shelf to prevent dam-
age to the blade and/or backplane.
4. Push the blade into the slot until the handles come in
contact with the shelf and the metal tacks insert into the
shelf holes.
5. Push the handles inward until they 'click' in place
6. Fasten the retention screws (turning in a clock-wise
direction) at both ends of the blade to secure it in place.
WARNING:
Improper installation of ATCA blades may damage the back-
plane.
Summary of Contents for aTCA-8202
