7
aTCA-80606PA
2 Hardware Platform
6U/19’’ chassis with front card cage for ATCA boards and rear card cage for ATCA RTM
board. The chassis is designed for easy access of any Field-Replaceable Units (FRU).
•
6-slot ATCA backplane with dual star Fabric Interface, Dual Star Base Interface and
bussed IPMB interface, supporting four 8U node board slots and two 8U hub board
slots. providing 40Gb/s connectivity (4 lanes with 10Gb/s).
•
Two Push-Pull Fan Tray arrangement provides optimized cooling for ATCA blades
with fault-tolerant capability; front-pluggable, hot-swappable, with 6 high-speed fans
per tray.
•
Two dedicated Shelf Manager bays accepting Shelf Managers based on
Pigeon Point ShMM-700.
•
ESD Wrist Strap Terminals at the front and the rear.
•
Removable air filter that meets the requirements of the Telcordia GR-78-CORE
specification.
•
Supports two front-pluggable AC Huawei PSUs, 1+1 redundant configured.
2.1 Shelf Front and Rear View
Figure 1: Front View
1. Fan Tray 1
5. Fan Tray 2
2. ShMC 1 (optional)
6. Air Filter
4.
ShMC 2 (optional)
7. ESD Wrist Strap
