Features
Control Channels: 3 or 12 Channel DMX Modes
Control Mode: Sound Active mode, Auto mode, Master/Slave, DMX-512 (3/6/15CH), Remote
control
Mixing Color: RGBW mixing color
IP Grade: IP20
Power Supply: AC 110-240V/50-60Hz Consumption: 60W
LED Units: Par Cans (2) 4x3W RGBW 4in1, (1) Led Ball 4x3w 4-in-1 RGBW LEDs, UV-White strobe
LEDs- 6x2W UV + 6x2W Strobe LEDs, RG Laser diode: 100mW 650nm red diode ,30mW 532nm
Green diode
5IN1 effects : UV effects, white strobe effects, LED Ball effects, Par light effects, Laser effects.
Weight: 12.1 lbs
Dimensions: 28.35 " x 7.87" x 5.9"
Operation
When power is on in DMX mode, the digital LED screen will show a red dot in lower right corner.
DMX address code setting: Press “MENU” button. When the digital LED displays d001-d512, press
“UP” or “DOWN” to set the address code. The code ranges from 001-512.
Function setting
Using the four function buttons on the controller bar you can set the operating mode of the unit.
Number Feature
Function
1
Power supply input
Attach the power cable here. Built-in fuse.
2
DMX input
3 pin XLR connector for DMX512 input communication.
3
DMX output
3 pin XLR connector for DMX512 output communication.
4
LED display
LED function display and menu buttons to control the operating mode.
5
MENU buttons
MENU function buttons x 4 (see below for operation).
6
Mic
Built-in microphone for Sound-to-Light operation.
7
Par can mounts
Attach the par can lights to the controller bar at the 2 points shown.
8
Lighting unit connections
Attach all 4 lighting cables to the controller bar at the points shown.
9
Derby FX mounts
Attach the derby FX to the controller bar at the 2 points shown.
10
Light stand socket
Tighten screw to secure the controller bar to the light stand.
