Unpacking:
Thank you for purchasing the Party Bar X5 by Adkins Pro Lighting. Every Party Bar X5 has been
thoroughly tested and has been shipped in perfect operating condition. Carefully check the shipping carton for
damage that may have occurred during shipping. If the carton appears to be damaged, carefully inspect your fixture
for any damage and be sure all accessories necessary to operate the unit has arrived intact. In the case damage has
been found or parts are missing, please contact our customer support number for further instructions. Do not return
this unit to your dealer without first contacting customer support.
Installation:
This unit should be placed on a stable solid surface to ensure that it will not fall. Also, always use a
safety cable that can hold 6 times the weight of the unit when installing the fixture. The equipment must be installed
by a professional, and it must be installed in a place where it is out of the reach of people’s grasp.
Caution! No user serviceable parts inside do not attempt repairs. In the event your
Party Bar X5
should fail, contact Adkins Pro Lighting.
Introduction
The Adkins Lighting Party Bar X5 is a high quality, high power, intelligent, DMX Light fixture. This fixture can be used
in standalone mode or DMX Controller mode. Please read these instructions carefully to familiarize yourself with the
basic operations of this unit.
Note:
The data inside this Manual may changed without notifying you due to continuous improvement.
Safety specifications
This device for indoor use only
，
the protection grade is: IP20
The installation, operation and maintenance must be managed by the qualified professional, and make sure to
operate it under the instruction of the Manual.
The light was designed to protect against electric shock and must connected to an outlet that is well grounded.
Please check if the voltage is AC 110-120V/50-60Hz before installing.
Do not operate when the cover is opened.
No user serviceable parts inside.
To reduce the risk of electrical shock or fire, do not expose this unit rain or moisture
Do not spill water or other liquids into or on to your unit.
Do not attempt to operate this unit if the power cord has been frayed or broken. Do not attempt to remove or
break off the ground prong from the electrical cord. This prong is used to reduce the risk of electrical shock and fire
in case of an internal short.
Disconnect from main power before making any type of connection.
Do not remove the cover under any conditions. There are no user serviceable parts inside.
Never operate this unit when it’s cover is removed.
Never plug this unit in to a dimmer pack
Always be sure to mount this unit in an area that will allow proper ventilation. Allow about 6” (15cm) between this
device and a wall.
Do not attempt to operate this unit, if it becomes damaged.
During long periods of non-use, disconnect the from wall outlet power.
Always mount this unit in safe and stable matter.
Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed
upon or against them, paying particular attention to the point they exit from the unit.
