Adkins LED-7x10W-RGBW-FlatPar, User Manual

Page: 4 / 6

Operation

DMX address setting: There are 2 DMX modes, 4 channel and 7 channel. To set the DMX starting
channel address press the MODE button until you see A--- or d---, then use the UP and DOWN
buttons to select the desired setting, then press the ENTER button to save. 7 channel mode is d001
- d512 and 4 channel mode display is A001 - A512

Internal program running: There are 9 internal programs to choose from. Press the MODE key to
choose different programs. See chart below.

If you use the supplied infrared remote controller to control the light, please set the mode to: ir.on,
and aim the remote control at the front of the LED light.
DMX Channel Values & Functions

4 Channel mode: A001 - A512
NO. Function
value
Description
CH1 Dimming R 0-255 Dimming R from darkness to brightness
CH2 Dimming G 0-255 Dimming G, from darkness to brightness
CH3 Dimming B 0-255 Dimming B, from darkness to brightness
CH4 Dimming W 0-255 Dimming W, from darkness to brightness

7 channel mode: d001 - d512
NO. Function
value
Description
CH1 Master Dimming 0-255 Dimming RGBW, from darkness to brightness
CH2 Dimming R 0-255 Dimming R from darkness to brightness
CH3 Dimming G 0-255 Dimming G, from darkness to brightness
CH4 Dimming B 0-255 Dimming B, from darkness to brightness
CH5 Dimming W 0-255 Dimming W, from darkness to brightness
CH6 Function Choosing
0-50 Strobe and dimming
51-100 Jump
101-150 Fade
151-200 Pulse jump
201~255 Sound active
CH7 Speed 0-255 Speed for CH6