Adkins LED-7x10W-RGBW-FlatPar, User Manual

Page: 3 / 6

Safety specifications

This device for indoor use only
，
the protection grade is: IP20

The installation, operation and maintenance must be managed by the qualified professional, and
make sure to operate it under the instruction of the Manual.

The light was designed to protect against electric shock and must connected to an outlet that is well
grounded.

Please check if the voltage is AC 100-240V/50-60Hz before installing.

Do not operate when the cover is opened.

No user serviceable parts inside.

To reduce the risk of electrical shock or fire, do not expose this unit rain or moisture

Do not spill water or other liquids into or on to your unit.

Do not attempt to operate this unit if the power cord has been frayed or broken. Do not attempt
to remove or break off the ground prong from the electrical cord. This prong is used to reduce the
risk of electrical shock and fire in case of an internal short.

Disconnect from main power before making any type of connection.

Do not remove the cover under any conditions.There are no user serviceable parts inside.

Never operate this unit when it’s cover is removed.

Never plug this unit in to a dimmer pack

Always be sure to mount this unit in an area that will allow proper ventilation. Allow about 6” (15cm)
between this device and a wall.

Do not attempt to operate this unit, if it becomes damaged.

This unit is intended for indoor use only, use of this product out`

doors voids all warranties.

During long periods of non-use, disconnect the unit’s main power.

Always mount this unit in safe and stable matter.

Power-supply cords should be routed so that they are not likely to be walked on or pinched by
items placed upon or against them, paying particular attention to the point they exit from the unit.
Note: Please make sure the power off before any installation, repair and clean
Features

Control Channels: 4 or 8 DMX Channels

Beam Angel: 25°

Control Mode: Sound Active mode, Auto mode, RGB mode, Static color mode, remote control
mode and DMX control mode

Working Environment: Indoor, -20
°
-40
°

Mixing Color: RGBW mixing color

IP Grade: IP20

Power Supply: AC 100-240V/50-60Hz

LED Unites: 7PCS×10W (RGBW 4in1)

Power consumption: 50W

Packing size: 7.5in × 5.5in × 7.5in

Weight: 1.8lb(1pc/CTN)