EZ Control 6 instruction manual
6
U pdate
Picture A
4. Finish the upgrading the LCD display OK
；
5. Restart the controller
。
4.9 RDM Setting
Please check if the equipment has the RDM protocol
！
1. Under non-edit status
，
press
RUN MODE
button for a while
，
then press
EDIT/REC
button
，
the controller enter into scan status
；
2. LCD display the scanned quantity after the scanning
（
It can cover 100 at least one time
）
；
3. If it can’t be scanned it will display “FAIL”
，
and exit RDM automatically
；
4. After scanning
，
the controller will select one of equipment automatically
，
and the equipment will
verified
，
the LCD display the selected equipment and light DMX ADD
；
5. Select the light by CHASE1 and 2
；
6. Adjust the DMX ADD by
UP
and
DOWN
，
or adjust it directly by FIXTURE 1~16 and
channel page turning button
；
7. After setting up the ADD and click
EDIT/REC
，
the controller all of LED flash, the new
DMX ADD is settled.
；
8. Press button
EDIT/REC
for a while
，
then click
EDIT/REC
to exit RDM
5. Delete All
Operate it under power off
！
1. Power off the controller
；
2. Press the button
EDIT/REC
and
RUN MODE
、
DEL/CLR
for a while
；
3. Power on the controller
，
LCD display
“
REST
”
and then display
“
OK
”
；
4. After delete all
，
and restart automatically
。
