22
BATTERY STATUS AND CHARGING
BATTERY STATUS:
This function is used to check the remaining charge of the battery. Plug the fixture in and press the
MODE button until “bXXX” is displayed. “XXX” represents an number between “000” and “100”, and
indicates the remaining battery life percentage. If “b---” is displayed, it means the battery is deplet-
ed, or that the device is running on AC power. Try to avoid depleting the battery completely, as this
can shorten the operational life of the battery.
Example: If “b050” is displayed, this means that half of the battery’s full capacity is remaining. If
“b025” is displayed, this means that a quarter of the battery’s full capacity is remaining.
NOTE: When the battery is charging or if the battery life is below 30%, the digital display will flash.
NOTE: After 20 seconds of inactivity, the display will revert back to the battery life display.
BATTERY RECHARGE:
To recharge the battery, plug the supplied AC cord into the AC input on the side of the unit and con-
nect to a matching power supply. A full recharge takes about 5.5 hours. The display will STOP flash-
ing when the unit reaches 100% charge.
NOTE: When unplugging the unit from charging and then applying power via battery, there will be a
slight charge drop.
For a faster recharge, put the Load Switch in the “Off” position and the Battery Switch in the “ON”
position.
