ADJ VIZI WASH Z19, User Manual

Page: 23 / 35

23
S Y S T E M M E N U
Personality
Select Personality, and press ENTER button to confirm, use UP/DOWN buttons to select Status Settings,
Fan Settings, Dim Modes, Dim Curves, Reset Motors, Display, or Service.
Status Settings
Select Status Settings, and press ENTER button to confirm. Use UP/DOWN buttons to select Pan
Invert, Tilt Invert, P./T. Feedback, P./T. Speed, or Hibernation, and press ENTER button to store.
Fan Settings
Select Fan Settings, and press ENTER button to confirm. Use UP/DOWN buttons to select Head,
or Base, and press ENTER button to store.
Dim Modes
Select Tilt Invert, and press ENTER button to confirm. Use UP/DOWN buttons to select Standard,
Stage, TV, Architectural, Theatre, Stage 2, or Dim Speed, and press ENTER button to store.
Dim Curve
Select P./T. Feedback, and press ENTER button to confirm. Use UP/DOWN buttons to select Square
law, Linear, Inv. SQ law, or S Curve, and press ENTER button to store.
Reset Motors
Select Reset Motors, and press ENTER button to confirm. Use UP/DOWN buttons to select Pan/
Tilt, Effect, or All, and press ENTER button to store.
Display
Select Display, and press ENTER button to confirm. Use UP/DOWN buttons to select Backlight
Intensity, Display Invert, Screen Saver Delay, or Display Lock ON/OFF, and press ENTER
button to store.
Service
Select Service, and press ENTER button to confirm. Current mode will show on the display, Use
UP/DOWN button to select 050, and press ENTER button to confirm. Use UP/DOWN buttons to
select Calibration, USB Port Power, Update Software, or Factory Restore (password=11).
When selecting Calibration, use UP/DOWN buttons to select Pan, Tilt, Zoom, Red, Green, Blue,
White, Red1, Green1, Blue1, White1......Red7, Green7, Blue7, and White7, then use UP and DOWN
button to adjust value.
When selecting USB Port Power, use UP/DOWN buttons to select OFF or ON.
When selecting Update Software, Use UP/DOWN buttons to select NO or YES.
When selecting Factory Restore, use UP/DOWN buttons to select NO or YES. When “YES” is
selected, enter password (password=11) to reset the fixture to factory settings.