ADJ Products, LLC - www.adj.com - Vizi Hex Wash7 Instruction Manual
Page
8
Vizi Hex Wash7
Truss Mounting
When installing the unit, the trussing or area of installation must be able to hold 10 times
the weight without any deformation. When installing the unit must be secured with a
Secondary safety attachment, e.g. and appropriate safety cable. Never stand directly
below the unit when mounting, removing, or servicing the unit.
Overhead mounting requires extensive experience, including calculating working load
limits, installation material being used, and periodic safety inspection of all installation
material and unit. If you lack these qualifications, do not attempt the installation yourself.
These installations should be checked by a skilled person once a year.
CA
D
The Vizi Hex Wash7 is fully operational in three different mounting positions; hanging
upside-down from a ceiling, mounted sideways on trussing, or set on a flat level
surface. Be sure this fixture is kept at least 0.5m away from any flammable materials
(decoration etc.). Always use and install the supplied safety cable as a safety measure
to prevent accidental damage and/or injury in the event the clamp fails (see next page).
Never use the carrying handles for Secondary attachment.
