background image

4

G E N E R A L  I N F O R M AT I O N

INTRODUCTION

Please read and understand all instructions in this manual carefully and thoroughly before attempting 

to operate these products. These instructions contain important safety and use information.

UNPACKING

The products in this kit have been thoroughly tested and have been shipped in perfect operating 

condition. Carefully check the shipping carton for damage that may have occurred during shipping. 

If the carton appears to be damaged, carefully inspect each unit included for damage and be sure all 

accessories necessary to operate the units have arrived intact. In the event damage has been found 

or parts are missing, please contact our customer support team for further instructions. Please do not 

return this kit to your dealer without first contacting customer support at the number listed below. Please 

do not discard the shipping carton in the trash. Please recycle whenever possible.

WARRANTY RETURNS

All returned service items whether under warranty or not, must be freight pre-paid and accompany a 

return authorization (R.A.) number. The R.A. number must be clearly written on the outside of the return 

package. A brief description of the problem as well as the R.A. number must also be written down on 

a piece of paper and included in the shipping container. If the unit is under warranty, you must provide 

a copy of your proof of purchase invoice. Items returned without a R.A. number clearly marked on the 

outside of the package will be refused and returned at customer’s expense. You may obtain a R.A. 

number by contacting customer support.

Summary of Contents for Vizi BSW 300





































Reviews: