background image

25

O F F S E T   M E N U

Gobo2 - Setting adjustment for gobo wheel 2.

1.  Press the ENTER button for at least 3 seconds, then press the UP or DOWN buttons so that 

“Gobo2” is displayed, press ENTER.

2.  Use the UP and DOWN buttons to make your adjustments, and then press ENTER to confirm. 

Press the MENU button for one second to exit.

Prism - Setting adjustment for the 1st prism.

1.  Press the ENTER button for at least 3 seconds, then press the UP or DOWN buttons so that “Prism” 

is displayed, press ENTER.

2.  Use the UP and DOWN buttons to make your adjustments, and then press ENTER to confirm. 

Press the MENU button for one second to exit.

Prism2 - Setting adjustment for the 2nd prism.

1.  Press the ENTER button for at least 3 seconds, then press the UP or DOWN buttons so that 

Prism2” is displayed, press ENTER.

2.  Use the UP and DOWN buttons to make your adjustments, and then press ENTER to confirm. 

Press the MENU button for one second to exit.

R-Prism - Setting adjustment for the rotating prism.

1.  Press the ENTER button for at least 3 seconds, then press the UP or DOWN buttons so that 

R-Prsim” is displayed, press ENTER.

2.  Use the UP and DOWN buttons to make your adjustments, and then press ENTER to confirm. 

Press the MENU button for one second to exit.

Angle/Frost - Setting adjustment for the frost filter.

1.  Press the ENTER button for at least 3 seconds, then press the UP or DOWN buttons so that “Angle/

Frost” is displayed, press ENTER.

2.  Use the UP and DOWN buttons to make your adjustments, and then press ENTER to confirm. 

Press the MENU button for one second to exit.

Focus - Setting adjustment for the focus.

1.  Press the ENTER button for at least 3 seconds, then press the UP or DOWN buttons so that “Focus” 

is displayed, press ENTER.

2.  Use the UP and DOWN buttons to make your adjustments, and then press ENTER to confirm. 

Press the MENU button for one second to exit.

E R R O R   C O D E S

If any of these warning’s appear and you are not certain on what form of action needs to be taken, please contact 

ADJ customer support for more information.
Temp. Sense Error

This will appear when the temperature check board is damaged.
CPU-8 Error, CPU-C Error, CPU-D Error

This will appear when the PC board or wires are damaged.
Memory Initial Fail

This will appear when the memory IC is damaged.
Temperature Sense Error

This will appear when the temperature check board is damaged.
Random Error Messages

Pan Reset Error, Pan Encode Error, Tilt Reset Error, Tilt Encode Error, Shutter Reset Fail, Dimmer Reset Fail, 

Color Reset Fail, Gobo Reset Fail, R-Gobo1 Reset Fail, Gobo2 Reset Fail, Prism Reset Fail, R-Prism Reset Fail, 

Prism2 Reset Fail, Focus Reset Fail, Angle/Frost Reset Fail.

These Error messages may appear when turning on or reseting the unit. Please contact ADJ customer support.

Summary of Contents for Vizi BSW 300





































Reviews: