ADJ VF SNOW FLURRY HO, User Manual, Page: 11 / 14

11
The UC IR infrared remote (not included) gives you control of simple functions. To control the fix-
ture, you must aim the remote at the front of the fixture. Maximum range is 30 feet. Please note: the
UC IR is deactivate when the unit is in DMX mode. UC IR mode will automatically save set-
tings from the last use.
To run your fixture using the UC IR remote, use the digital menu located on the rear panel of the unit.
Press the MENU button until “Ir” is displayed and press ENTER. Controls are described below:
STAND BY - Use to switch the device on or off.
“” and “DIMMER -” - Use to adjust the output intensity. “+” increases snow output, and
“-” decreases snow output.
ADJ UC IR CONTROL
TIMER REMOTE CONTROL
Always be sure to maintain an adequate supply of ADJ Brand Snow Juice in the fluid reservoir.
Running the snow machine dry will cause pump failure and or clogging. This is the leading
cause of failure in snow, fog, and haze machines. Only ADJ Snow Juice is recommended for
use with this device.
Timer Remote Operation: Connect the remote to the fog machine. The timer function allows fog to
be emitted at designated intervals. The remote has three (3) LED’s that indicate different functions.
Please note that this function will be deactivated when the device is in DMX or UC IR control-
mode.
• The yellow LED located on the left indicates that the timer is active.
• The red LED indicates that the remote is connected and active.
• The green LED on the right indicates that the timer remote control is active. This button can be
used to manually emit snow. The green LED will also flash if the tank fluid level is empty or low.
The remote also features three rotary knobs.
• The Duration knob sets the timer duration (Length of snow output burst).
• The Interval knob sets the snow output interval (Length between snow output bursts).
• The Output knob sets the amount of snow the machine will output.
Caution: Before removing or replacing the remote control unit, disconnect the power supply.