background image

ADJ Products, LLC  -  www.adj.com  - VBar Pak User Manual Page 16

ADJ Products, LLC  -  www.adj.com  - VBar Pak User Manual Page 17

  Channel   Value  

                  Function

       

1                                                         RED

                       0 - 255                           0% - 100%           

       2                                                       GREEN

                       0 - 255                           0% - 100%

       3                                                        BLUE

                       0 - 255                           0% - 100%

       4                                                      AMBER

                       0 - 255                           0% - 100% 

       5                                            MASTER DIMMER

                       0 - 255                           0% - 100%

 VBar Pak                                                     5 Channel Mode

  Channel   Value  

                  Function

       

1                                                         RED

                       0 - 255                           0% - 100%           

       2                                                       GREEN

                       0 - 255                           0% - 100%

       3                                                        BLUE

                       0 - 255                           0% - 100%

       4                                                      AMBER

                       0 - 255                           0% - 100%

 VBar Pak                                                     4 Channel Mode

Channels 1, 2, & 3 will not work, when Channel 6 is being used.

  Channel   Value  

                  Function

       

1                                                         RED

                       0 - 255                           0% - 100%           

       2                                                       GREEN

                       0 - 255                           0% - 100%

       3                                                        BLUE

                       0 - 255                           0% - 100%

       4                                                      AMBER

                       0 - 255                           0% - 100% 

       5                                            MASTER DIMMER

                       0 - 255                           0% - 100%

       6                                              COLOR MACROS

                       0 - 255        PLEASE SEE 1 CHANNEL MODE

 VBar Pak                                                     6 Channel Mode

Channels 1, 2, & 3 will not work, when Channel 7 is being used.

  Channel   Value  

                  Function

       

1                                                         RED

                       0 - 255                           0% - 100%           

       2                                                       GREEN

                       0 - 255                           0% - 100%

       3                                                        BLUE

                       0 - 255                           0% - 100%

       4                                                      AMBER

                       0 - 255                           0% - 100% 

       5                                            MASTER DIMMER

                       0 - 255                           0% - 100%

       6                                                   STROBING

                       0 - 15                                  OFF

                     16 - 255                         SLOW - FAST

       7                                              COLOR MACROS

                       0 - 255        PLEASE SEE 1 CHANNEL MODE       

 VBar Pak                                                     7 Channel Mode

Summary of Contents for VBar Pak













Reviews: