UV Flood 36 Trouble Shooting
Listed below are a few common problems the user may encounter,
with solutions.
Unit not responding to DMX:
1. Check that the DMX cables are connected properly and are
wired correctly (pin 3 is “hot”; on some other DMX devices
pin 2 may be ‘hot’). Also, check that all cables are connected
to the right connectors; it does matter which way the inputs
and outputs are connected.
Unit does not respond to sound:
1. Quiet or high pitched sounds will not activate the unit.
With this feature you can connect the fixtures to one another
using the I.E.C. input and output sockets. The quantity that can
be connected is 26 fixtures maximum for 120V and 57 fixtures
maximum for 230V. After the maximum fixtures has been reached
you will need to use a new power outlet. They must be the same
fixtures. DO NOT mix fixtures.
UV Flood 36 Power Cord Daisy Chain
First unplug the power. Locate and remove the unit’s power cord.
Once the cord has been removed located the fuse holder located
inside the power socket. Insert a flat-head screw driver into the power
socket and gently pry out the fuse holder. Remove the bad fuse and
replace with a new one. The fuse holder has a built-in socket for a
spare fuse be sure not to confuse the spare fuse with active fuse.
UV Flood 36 Fuse Replacement
ADJ Products, LLC - www.adj.com - UV Flood 36 Instruction Manual Page 12
ADJ Products, LLC - www.adj.com - UV Flood 36 Instruction Manual Page 13
UV Flood 36 Photometric Chart
0
0
1
2
3
4
5
1
1
2
2
3
Intensity(LUX)
Beam opening(m)
3
57
93
201
45
18
9
4
UV LEDs
2.17
1.09
3.26
4.34
5.43
57° Diameter(m)
4.22
2.11
6.32
8.43
10.53
93° Diameter(m)
Beam angle 57°
Field angle 93°
