ADJ Products, LLC - www.adj.com - Ultra Hex Par3 User Manual Page 13
ADJ Products, LLC - www.adj.com - Ultra Hex Par3 User Manual Page 12
Master-Slave Configuration:
This function will allows you to link units together to run in a Master-
Slave mode. In Master-Slave operation one unit will act as the con-
trolling unit and the others will react to the controlling units built-in
programs. Any unit can act as a Master or as a Slave however, only
one unit can be programmed to act as the “Master.”
Master-Slave Connections and Settings:
1. Daisy chain your units via the XLR connector on the rear of the
unit. Use standard XLR data cables to link your units together.
Remember that the Male XLR connector is the input and the
Female XLR connector is the ouput. The first unit in the chain
(master) will use the female XLR connector only. The last unit in
the chain will use the male XLR connector only.
2. Set the “Master” unit to your desired mode of operation.
3. Connect the first “Slave” unit to the “Master.”
4. On the “Slave” unit press the MODE button until “SLAv” is dis-
played. The “Slave” unit will now follow the “Master”.
Ultra Hex Par3 Master-Slave Configuration
With this feature you can connect the fixtures to one another
using the IEC input and output sockets. The quantity that can be
connected is 20 fixtures maximum. After 20 fixtures you will need
to use a new power outlet. They must be the same fixtures. DO
NOT mix fixtures.
Ultra Hex Par3 Power Cord Daisy Chain
The ADJ
RFC
remote
(sold seperately) has many different functions and al-
lows you to control your Ultra Hex Par3 from long distance. The ADJ RFC
remote can control your system up to 150 ft. To use the RFC you must first
activate the fixtures receiver, to activate the receiver please see the instruc-
tions on page 10.
BLACKOUT
-
Pressing this button will blackout the fixture.
AUTO RUN
-
This button will run 1 of 3 auto run programs. Each press
of the button will scroll through Color Fade, Color Change, and Random.
When you activate Color Fade, you can use the “+” and “-” buttons to scroll
through the 16 different color fade modes. When you activate Color Change,
you can use the “+” and “-” buttons to scroll through the 16 different color
change modes. You can control the fade speed and color change speed of
the Auto Run by pressing the speed button and then adjust the speed using
the “+” and “-” buttons.
PROGRAM SELECTION
-
This button will activate Static Color mode.
Press this button to activate Static Color mode. Use the “+” or “-” to scroll
through the 63 colors. Once you have found your color, you can press the
Flash Button to activate strobing and use the “+” or “-” to adjust the Flash
rate.
FLASH
-
This button will activate the flash (strobe) effect. You can control
the flash speed by pressing the “+” and “-” buttons.
SPEED
-
Press this button and use the “+” & “-” buttons to adjust the speed
of the Built-In Programs.
SOUND ACTIVE -
This button activates sound active mode. Use the “+” &
“-” buttons to scroll through the 16 sound active modes. Press this button
againg to switch to sound sensitivity adjustment and then use the “+” & “-”
buttons to adjust the sound sensitivity level.
R G B W/A -
Press either one of these buttons and the press the “+” or “-”
to adjust the brightness. Press the Flash button to activate strobing and use
the “+” or “-” buttons to adjust the strobe speed.
NOTE: Press the W/A button to scroll through White, Amber, and UV.
“+” and “-” -
Use these buttons to adjust the flash rate, speed of the Auto
Run, fade speed, sound sensitivity, and output intensity. Use these buttons
to scroll through the static colors.
Ultra Hex Par3 ADJ RFC Operation
Ultra Hex Par3 Photometric Chart
