ADJ Products, LLC - www.adj.com - Ultra Hex Par3 User Manual Page 9
ADJ Products, LLC - www.adj.com - Ultra Hex Par3 User Manual Page 8
Ultra Hex Par3 Operating Instructions
is displayed. This is the 8 Channel DMX Mode.
• To run the 11 Channel Mode, press the MODE button until “Ch11”
is displayed. This is the 11 Channel DMX Mode.
• To run the 12 Channel Mode, press the MODE button until “Ch12”
is displayed. This is the 12 Channel DMX Mode.
4. Please see pages 14-22 for DMX values and traits.
5. After you have chosen your desired DMX Channel mode plug in
the fixture via the XLR connections to any standard DMX control-
ler.
RGBWA + UV Dimmer Mode:
1. Plug the fixture in and press the MODE button until:
2. When “r.XXX” is displayed you are in Red dimming mode. Press
the UP and DOWN buttons to adjust intensity. After you have
finished adjusting the intensity, or you would like to skip to the
next color, press the SET UP button.
3. When “G.XXX” is displayed you are in Green dimming mode.
Press the UP and DOWN buttons to adjust intensity.
4. When “b.XXX” is displayed you are in Blue dimming mode. Press
the UP and DOWN buttons to adjust intensity.
5. When “U.XXX” is displayed you are in White dimming mode. Press
the UP and DOWN buttons to adjust intensity.
6. When “A.XXX” is displayed you are in Amber dimming mode.
Press the UP and DOWN buttons to adjust intensity.
7. When “u.XXX” is displayed you are in UV dimming mode. Press
the UP and DOWN buttons to adjust intensity.
8. After you have adjusted the RGBWA + UV colors to make your
desired color you can then activate strobing by pressing the SET
UP button to enter the Flash (strobe) mode.
9. “FS.XX” will be displayed, this is Flash mode. The Flash can be
adjusted between “FS.00” (flash off) to “FS.15” (fastest flash).
Sound Active Mode:
In this mode the Ultra Hex Par3 will react to sound, and chase
through the different colors.
1. Plug the fixture in and press the MODE button until “SoXX” is
displayed. “XX” represents the sound active mode (1-16) currently
displayed. Use the UP and DOWN buttons to scroll through th
sound active modes.
Ultra Hex Par3 Operating Instructions
2. After you have found your desired sound active mode, press the
SET UP button to adjust the sound sensitivity. “SJ-X” will be dis-
played. Use the UP and DOWN buttons to adjust the sensitivity.
“SJ-1” is the lowest sensitivity, “SJ-8” is the highest.
Auto Run Mode:
There are 3 types of Auto Run Modes to choose from; Color Fade,
Color Change, and both modes running together. The running speed
is adjustable in all 3 modes.
1. Plug the fixture in and press the MODE button until either
“AFXX”, “AJXX”, or “A-JF” is displayed. Press the SET UP Button
to change between the 3 Auto Run modes
• AFXX = Color Fade mode, there are 16 Color Fade modes to
choose from. Use the UP or DOWN buttons to scroll through the
different Auto Fade modes.
• AJXX = Color Change mode, there are 16 Color Change modes to
choose from. Use the UP or DOWN buttons to scroll through the
different Auto Change modes.
• A-JF = Both Color Fade and Color Change modes running.
2. After you have chosen your desired running mode press the SET
UP button until “SP.XX” is displayed. When this is displayed you
can adjust the running speed of your desired program. Use the
UP or DOWN button to adust the speed between “SP.01” (slow-
est) and “SP.16” (fastest). Once you have set your desired running
speed, press the SET UP button to return to your desired Auto
Run Mode.
Static Color Mode:
1. Plug the fixture in and press the MODE button until “CLXX” is
displayed.
2. There are 63 colors to choose from. Select your desired color by
pressing the UP and DOWN buttons. After you have selected your
desired color you can activate strobing by pressing the SET UP
button to enter the Flash (strobe) mode.
3. “FS.XX” will be displayed, this is Flash mode. The Flash can be
adjusted between “FS.00” (flash off) to “FS.15” (fastest flash).
LED Display On/Off:
To set the LED display to turn off after 20 seconds, press the MODE