background image

7

S A F E T Y   P R E C A U T I O N S

WARNING! NOT FOR RESIDENTIAL USE. DRY LOCATIONS ONLY!

DO NOT SPILL WATER AND/OR ANY LIQUIDS INTO, ON, OR NEAR THE FIXTURE. 

TO PREVENT OR REDUCE THE RISK OF ELECTRICAL SHOCK AND/OR FIRE, DO NOT EXPOSE THIS 

DEVICE TO RAIN AND/OR MOISTURE.

RISK GROUP 3 - WARNING!

•  THIS FIXTURE EMITS ULTRAVIOLET RADIATION (UV) AT A PRIMARY WAVELENGTH OF 

395NM - 410NM.

•  AVOID EYE AND/OR SKIN EXPOSURE AT DISTANCES SHORTER THAN 3.3 feet (1m).

•  DO NOT LOOK DIRECTLY INTO THE BEAM AT DISTANCES SHORTER THAN 11 feet (3.3m) 

AND/OR VIEW THE BEAM DIRECTLY WITH OPTICAL INSTRUMENTS THAT MAY CONCEN-

TRATE THE LIGHT/RADIATION OUTPUT.

•  INDIVIDUALS SUFFERING FROM A RANGE OF EYE CONDITIONS, SUNLIGHT EXPOSURE 

DISORDERS, OR INDIVIDUALS USING PHOTOSENSITIVE MEDICATION, MAY EXPERIENCE 

DISCOMFORT IF EXPOSED TO THE ULTRAVIOLET LIGHT EMITTED FROM THIS FIXTURE.

•  THERE ARE NO USER SERVICEABLE PARTS INSIDE THIS UNIT. DO NOT ATTEMPT ANY 

REPAIRS YOURSELF, AS DOING SO WILL VOID THE MANUFACTURER’S WARRANTY. IF 

YOUR UNIT REQUIRES SERVICE, PLEASE CONTACT ADJ CUSTOMER SUPPORT.

•  CONFIRM POWER SOURCE PROVIDES THE REQUIRED VOLTAGE FOR THIS FIXTURE. 

•  DO NOT OPERATE FIXTURE IF THE POWER CORD IS FRAYED OR BROKEN.

•  DO NOT REMOVE OR BREAK OFF THE GROUND PRONG FROM THE POWER CORD.

•  NEVER PLUG THIS FIXTURE INTO A DIMMER PACK.

•  DO NOT OPERATE THIS FIXTURE IF HAS BEEN DAMAGED IN ANY WAY.

•  DISCONNECT THE FIXTURE FROM POWER DURING LONG PERIODS OF NON-USE.

•  ALWAYS MOUNT THIS FIXTURE TO A SAFE AND FLAT SURFACE.

•  THIS FIXTURE SHOULD BE INSTALLATION AWAY FROM HEAT SOURCES SUCH AS RADIA-

TORS, HEAT RESISTERS, STOVES, AMPLIFIERS, AND DIRECT SUNLIGHT.

Summary of Contents for Startec UVLED 24.











Reviews: