©
American DJ
®
- www.Americandj.com - SP4LED User Manual Page 11
©
American DJ
®
- www.Americandj.com - SP4LED User Manual Page 12
SP4LED 1 Channel - DMX Values & Functions
Channel Value
Function
1 MASTER DIMMER
0 - 255 0% - 100%
2 PROGRAMS
0 - 9 DIMMING
10 - 29 PROGRAM 1
30 - 49 PROGRAM 2
50 - 69 PROGRAM 3
70 - 89 PROGRAM 4
90 - 109 PROGRAM 5
110 - 129 PROGRAM 6
130 - 149 PROGRAM 7
150 - 169 PROGRAM 8
170 - 189 PROGRAM 9
190 - 209 PROGRAM 10
210 - 229 PROGRAM 11
230 - 249 AUTO RUN
250 - 255 SOUND ACTIVE
3 PROGRAM SPEED/SOUND SENSITVITY
1 - 255 PROGRAM SPEED SLOW - FAST
1 - 255 SOUND SENSITIVITY
LEAST SENSITIVE - MOST SENSITIVE
output channel 1, 2 is output channel 2, 3 is output channel 3, and 4
is output channel 4.
“+” and “-” -
Use these buttons to adjust the speed of the Auto Run,
sound sensitivity, and program selection.
DMX Control:
Operating through an DMX controller gives the user the freedom to
create their own programs tailored to their own individual needs.
Follow the directions below to set your DMX Mode and address.
1. Before connecting to an DMX controller, your fixture has different
DMX channel modes, please select your desired mode by press-
ing the DMX Mode button, then using the “+” or “-” buttons to
scroll through the DMX Channel Modes. Set the mode before you
address the fixture. See the bottom of this page for the DMX
modes.
2. After you have selected your mode, set the DMX address for the
fixture by pressing the “S” button. When the “S” button is pressed
the output channel LED’s will flash 2-3 times. Use the number but-
tons to press in your desired address.
3. After the output channel LED’s have flashed, output channel 1 LED
will remain lit, press the first number in your desired address.
4. After you have pressed the first number in your address, output
channel 2’s LED will light. Now press the button of the second num-
ber in your desired address.
5. After you have pressed the second number in your address, output
channel 3’s LED will light. Now press the third and last number in
your desired address. After all three numbers have been entered,
the output channel LED’s will flash 2-3 times to indicate that the
DMX address is correct. The unit will then automatically enter DMX
mode. If the DMX address is incorrect the output channel 1 LED will
be lit.
6. Now you may connect the fixture via the XLR connections to any
standard DMX controller. Please see pages 12-14 to for a detailed
descriptions of the DMX modes, values, and traits.
• If Output Channel 1 is lit, you are in DMX Mode 1: 1 DMX
Channel.
SP4LED ADJ LED RC Operating Instructions
SP4LED ADJ LED RC Operating Instructions
• If Output Channel 2 is lit, you are in DMX Mode 2: 5 DMX
Channels.
• If Output Channel 3 is lit, you are in DMX Mode 3: 7 DMX
Channels.
• When using Channel 2 values 10-249, Channel 3 will control the speed of
the programs.
• When using Channel 2 values 250-255, Channel 3 will control the sound
sensitivity.
